Installation

This information contains instructions to install napalm_dellos10. Included is information on the setup environment for managing Dell EMC Networking OS10 switches using Python.

Install NAPALM

Install the Dell Networking OS10 NAPALM driver:

sudo apt-get install libffi-dev libssl-dev python-dev python-cffi libxslt1-dev python-pip
sudo pip install --upgrade cffi
sudo pip install napalm-dellos10

Test your setup

Open the Python interpreter terminal using “python”:

>>> from napalm_base import get_network_driver
>>> d = get_network_driver('dellos10')
>>> e = d('<HOSTNAME/IP_ADDRESS>', '<USERNAME>', '<PASSWORD>', optional_args={'global_delay_factor': 3})
>>> e.open()
>>> e.get_facts()
>>> e.close()